Sony BDV-HZ970W Speaker Installation Manual

Speaker Installation

Guide
BDV-HZ970W
© 2010 Sony Corporation Printed in Malaysia
Assembling the front speakers
Required parts
 
×2 ×2
Front speaker (R):
with red colored tube
Front speaker (L):
with white colored tube
 
×2 ×2
1
Thread the speaker cord () through the bottom hole in the base
().

4-187-308-11(1)

×2

×8

Colored tube
2
Thread the speaker cord () into the bottom of the post ( or ) and
out the opposite end.
(1)
You can choose either the long posts () or the short posts () to assemble the
speakers.

3
Thread the speaker cord () through the hole on the bottom of the
speaker () and out the hole on the rear.
4
Insert the post ( or ) into the hole on the bottom of the speaker
(), so that the screw on the top of the post faces the front of the
speaker.
Screw
5
Secure the post ( or ) with the screws ().
6
Connect the speaker cord (). Then, secure the speaker cord by running
it through the slit.
Connect the speaker cord with the colored tube to , and the speaker cord without the
colored tube to .

Colored
tube
Note
Match the color of the tube and label.

or

Screw holes


 or 

 or 
Slit
Label


Continued 