4
Press I/_) to turn the surround amplifier
on.
When wireless transmission
is activated,
the S-AIR/STANDBY
indicator turns
green.
S-AIR/STANDBY indicator
If the S-AIR/STANDBY
indicator does not
turn green, see "Surround
amplifier"
(page 13).
For details of the S-AIR function,
see
"Using an S-AIR Product"
(page 46).
About
the standby
mode
The surround amplifier enters standby mode
automatically (the S-AIR/STANDBY indicator
turns red) when the main unit is in standby mode
or wireless transmission is deactivated.
The surround amplifier turns on automatically
(the S-AIR/STANDBY indicator turns green)
when the system is turned on and wireless
transmission is activated.
Step5: Performing the
EasySetup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
m
• To use the optional surround back speakers, set
[Surround Back] in [Speaker Settings] to [Yes]
(page 54).
:
>
:2::
÷/_,/,v/+, @
,,,
?
i :?
1
2
---_'o" HOME
Turn on the TV.
Connect the calibration
mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration
mic at ear level using
a tripod, etc. (not supplied).
The front of
each speaker
should face the calibration
mic, and there should be no obstruction
between
the speakers and the calibration
mic.
30 us