Usingan S-Air Product - Sony BDV-HZ970W Operating Instructions Manual

46us
Usingan S-AIR Product
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The nmnber of usable
S-AIR main units depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
- Surround amplifier (supplied): You
can enjoy surround speaker sound
wirelessly.
- S-AIR receiver (optional): You can
enjoy system sound in another room.
Room A
S-AIR main unit
v
S-AIR sub unit v
v
(surround amplifier)
Room B
S-AIR sub unit
(S-AIR receiver)
(not supplied)
For the surround amplifier
For the S-AIR receiver
Simply by matchiug the ID of the uuit aud the
S-AIR sub uuit, you cau activate wireless
trausmissiou.
To set the ID of the unit
1 Set the S-AIR ID switch of the unit to
the desired ID.
2
3
S-AIR ID switch
You can select any ID (A, B, or C).
Press I/_.
The system turns on.
Set the S-AIR sub unit to the same ID.
Wireless transmission is activated as
follows (example):
j IDA
v
IDA
IDA
To set the ID of the surround
amplifier
1 Make sure that the SURROUND
SELECTOR switch of the surround
amplifier is set to SURROUND.
2 Set the S-AIR ID switch of the surround
amplifier to match the ID (A, B, or C) of
the unit.
3 Press I/_ on the surround amplifier.
When wireless transmission is activated,
the S-AIR/STANDBY indicator of the
surround amplifier turns green.
For details of the S-AIR/STANDBY
indicator, see "Surround amplifier"
(page 13).
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.