Table of Contents
Advertisement
Connection of video components
VIDEO DECK
2
AUDIO IN
AUDIO OUT
VIDEO OUT
VIDEO iN
VIDEO IN
VIDEO OUT
AUDIO IN
AUDIO OUT
VIDEO IN
Monitor TV
F
'
Somes,
SS,
ESO
mae
2
See
Sle]
See
===
aE
=
eeae 0Un ass OO]
S-VIDEO jacks
In the S-Video (Y/C separated) signal transmission system, the regu-
lar video signal (composite signal) is separated into a signal identify-
ing the brightness (Y: juminance) and a signal identifying the color
(C: chroma) to be transmitted.
Use of these jacks provides improved
picture quality. When
the
S-VIDEO jacks are to be used, please read carefully the instruction
manuals of the video components.
@ Connection of monitor TV
Connect the video input jack of the monitor TV to the
MONITOR OUT jack on the rear panel using a video con-
nection cord.
If the monitor TV is equipped with an S-VIDEO input
jack, connect it to the S-VIDEO jack of this unit.
Notes:
.
2. Whena
video signal is input to this unit through the S-VIDEO
jack, the same signal is not output from the MONITOR OUT
video jack.
a
VIDEO 3
VIDEO.
L AUDIO R
pi
Dubbing between a VCR connected to a composite input/output
and a VCR connected to an S-VIDEO input/output is not possible.
@ Connection of other video components
The S-VIDEO input jacks are also provided for the VIDEO
3 inputs. Therefore, recording a video source of the com-
ponent connected to VIDEO 2 S-VIDEO jacks is possible.
KR-Vg030 (En
11
Advertisement
Table of Contents
