Table of Contents
Advertisement
OPERATION
Stopping Unit
The cutting attachment continues to run for a short period after
the unit is switched off.
1.
Release power switch (C)
and allow cutting attachment
to stop.
2.
If unit does not stop when
power switch is released,
remove the battery to stop
the power supply to product.
Have your authorized
servicing dealer repair unit
before using product again.
Edger Operation Techniques
1.
Before edging, water the area to soften the ground to make edging
easier.
2.
Before edging, check the area and remove all obstacles and objects
that could be thrown.
3.
Plan to edge regularly to make it easier to keep a neat edge and to
avoid having to make more than one pass.
Note: Blade depth may have to be adjusted due to differences in
height between the hard surface and the top of the grass.
Remove battery before adjusting blade height, otherwise
serious personal injury may result.
Wear gloves or personal injury may result. Gearcase and
surrounding area may be hot.
28
DPE-2100
A
B
X7508310301
© 12/23 ECHO Incorporated
C
Advertisement
Table of Contents
