Stopping Engine; Edger Operation Techniques - Echo pe-225 Operator's Manual

OPERATION
3. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly grip
throttle handle and throttle
trigger lockout with left hand.
Rapidly pull recoil starter
handle/rope (D) until engine
fires.
Note: If engine does not start after 2-3 pulls, use Cold Start
Procedure.

Stopping Engine

1. Throttle
Release throttle trigger and
allow engine to return to idle
before shutting off engine.
2. Stop Switch
Move stop switch button (A)
backward to STOP position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using unit
again.

Edger Operation Techniques

1. Before edging, water the area to soften the ground to make edging
easier.
2. Before edging, check the area and remove all obstacles and objects
that could be thrown.
3. Plan to edge regularly to make it easier to keep a neat edge and to
avoid having to make more than one pass.
Note: Blade depth may have to be adjusted due to differences in
height between the hard surface and the top of the grass.
24
A
© 03/21 ECHO Incorporated
PE-225
D
X7732272804