Stopping Unit - Echo DPE-2600 Operator's Manual

OPERATION
2. Push enable button (A) once
to turn on power to unit.
Power indicator LED (B)
illuminates when power to
unit is turned on.
3. Hold down operator
presence switch (C). Move
lock off lever switch (D)
backward to free power
switch (G), and then depress
power switch to increase
RPM.
When power to unit is turned on:
• After 90 seconds of inactivity, unit will power itself off.
• If power indicator LED remains lit, operation is normal.
• If power indicator LED flashes once per second, the battery needs to be
charged.
• If power indicator LED flashes four times per second, there is a fault
within the product. Turn power off to unit. Remove battery. Clear debris
from around line head. Install battery. Turn power on to unit. If flashing
continues, have your authorized servicing dealer repair the product.

Stopping Unit

The attachment continues to run for a short period after the unit
is switched off.
24
DPE-2600
D
X7508310600
© 03/23 ECHO Incorporated
C
G