Echo DPE-2100 Operator's Manual page 23

DPE-2100
Do not operate the charger in explosive atmospheres, such
◆
as in the presence of flammable liquids, gases or dust.
Charger can produce sparks which may ignite the dust or
fumes - there is a risk of explosion.
Connect the charger only to the mains of voltage and
◆
frequency specified on the rating plate.
Connect the charger only to an easily accessible wall
◆
outlet.
Never insert objects in the battery's or charger's cooling
◆
slots.
Do not charge or use a defective, damaged or deformed
◆
battery and charger.
Do not open, damage or drop the battery or the charger.
◆
Fluid may leak from the battery if it is damaged or not used
◆
properly; avoid contact with the skin. In the event of
accidental contact, wash the affected areas of the skin with
plenty of water and soap. If fluid gets in the eyes, do not
rub. Rinse the eyes with plenty of water for at least 15
minutes. Also seek medical assistance.
Never bridge (short circuit) the battery contacts or the
◆
charger's terminals with metallic objects.
Protect from direct sunlight, heat and open flames and
◆
never throw battery into fire; there is a risk of explosion.
In the event of smoke or fire in the charger, disconnect it
◆
from the wall outlet immediately.
If the connecting cord is damaged, immediately disconnect
◆
the plug from the power supply to avoid the risk of electric
shock.
Do not expose battery to microwaves or high pressure.
◆
To reduce the risk of stumbling, position and mark the
◆
connecting cord in such a way that it cannot be damaged
or endanger others.
The battery comes partially charged from the factory and needs to be
fully charged before first use. Charge the battery when it no longer
produces sufficient power to operate the unit or when battery lights
indicate that the battery is low.
X7508310301
© 12/23 ECHO Incorporated
ASSEMBLY
23