Yamaha YSP-800 Owner's Manual page 94

• Dolby Digital
Dolby Digital is a digital surround sound system that gives
you completely independent multi-channel audio. With 3
front channels Cleft, center, and right), and 2 surronnd
stereo channels, Dolby Digital provides 5 full-range audio
channels. With an additional channel especially for bass
effects, called LFE (low frequency effect), the system has
a total of 5.1-channels (LFE is counted as 0.1 channel). By
using 2-channel stereo for the surround speakers, more
accurate moving sound effects and surround sound
environment are possible than with Dolby Surround. The
wide dynamic range (from maximunl to minimmn
volume) reproduced by the 5 fnll-range channels and the
precise sound orientation generated using digital sound
processing provide listeners with previously nnheard of
excitement and realism.
With this unit, any sound environment from monaural up
to a 5. l-channel configuration can be freely selected for
your enjoyment.
• Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to
decode vast nnmbers of existing Dolby Surround software.
This new technology enables a discrete 5-channel
playback with 2 front left and right channels, 1 center
channel, and 2 surround left and right channels (instead of
only 1 surround channel for conventional Pro Logic
technology). Music and Game modes are also available for
2-channel sources in addition to the Movie mode.
• Dolby Surround
Dolby Surround uses a 4 channel analog recording system
to reproduce realistic and dynanfic sound effects: 2 front
left and right channels (stereo), a center channel t_r dialog
0nonanral), and a surround channel for special sound
effects (monaural). The surround channel reproduces
sound within a narrow t_equency range.
Dolby Surround is widely used with nearly all video tapes
and laser discs, and in many TV and cable broadcasts as
well. The Dolby Pro Logic decoder built into this unit
employs a digital signal processing system that
automatically stabilizes the volnme on each channel to
enhance moving sound effects and directionality.
• DTS (Digital Theater Systems)
Digital Surround
DTS digital surround "a, a s developed to rephtce tire analog
soundtracks of movies with a 6-channel digital sound
track, and is now rapidly gaining popularity in movie
theaters around the world. Digital Theater Systems Inc.
has developed a home theater system so that you can enjoy
the depth of sound and natural spatial representation of
DTS digital surround in your home. This system prodnces
practically distortion-free 6-channel sound (technically, a
left, right and center channels, 2 surround channels, plus
an LFE 0.1 channel as a subwoofer, for a total of 5. l-
channels). The unit incorporates a DTS-ES decoder that
enables 6.1- channel reprodnction by adding the surround
back channel to existing 5. l-channel format.
• Neo:6
Neo:6 decodes tire conventional 2-channel sources for 6
channel playback by the specific decoder. It enables
playback with the full-range channels with higher
separation just like digital discrete signal playback. Two
modes are available; Music mode for playing music
sources and Cinema mode for movies.
• PCM (Linear PCM)
Linear PCM is a signal t_rmat under which an analog
audio signal is digitized, recorded and transnfitted without
using any compression. This is used as a method of
recording CDs and DVD audio. The PCM system uses a
technique for sampling the size of the analog signal per
very small unit of time. Standing for pulse code
modulation, the analog signal is encoded as pulses and
then modulated for recording.
• LFE 0.1 channel
This channel is for the reproduction of low bass signals.
The t?equency range for this channel is 20 Hz to 120 Hz.
This channel is counted as 0.1 because it only enforces a
low frequency range compared to the fnll-r:mge
reproduced by the other 5/6 channels in Dolby Digital or
DTS 5.1/6. l-channel systems.
90