Yamaha YSP-800 Owner's Manual page 68

+++
Use the remote control to access and adjust each
parameter.
You can adjust the SET MENU parameters while the unit is
reproducing sound.
1 Press YSP on the remote control to switch to
the operation mode of this unit.
2
Press MENU on the remote control.
The SET MENU screen appears on your TV.
MENU
+=F=_ +,4Fml+ i
-,_ + i,li=i,_h
÷ , NENEIR'¢
, AIJTO SETUP
,BAEIC SETUF
. NAMJFIL SETUP
[_.3 " [T] : IJ_ "Dc,+_¢ i
[ENTER] : Eraer
• The control buttons used for SET MENU are displayed on
the bottom of the screen.
• To return to the previous screen while using SET MENU,
press RETURN on the remote controh
• To resume cursor button operations after changing the
control area by pressing an input selector button, press
TEST on the rmnote control.
• To cancel the SET MENU screen, press MENU once
more.
• You can also perform the following operations in the t)'ont
panel display.
• If you press an input selector button during the SET
MENU operations, the cursor buttons become inefli_ctive+
In this case, press TEST once.
Press _ / v to select MANUAL SETUP and
then press ENTER.
Tile follov4ng screen appears cm your TV.
+
-, t.">
+
.. I'='III},INI_I +.,I., =+++
" + !1"+I % ,++'%. ,,,a,. I +J+
+ SOUN[J NENIJ
BEr/N NENU
INFIJT NENU
DISFL _:1'¢ _'IENU
[A] "[_3 : IJF "[Joke]
[ ENTEB ] : Enter
Press _ / _ to select a sub menu and then
press ENTER.
5 Press _ / v / <] / _ and ENTER to configure
each parameter.
Press MENU to exit.
Tile OSD disappears from your TV screen.
MENU
64