Yamaha YSP-800 Owner's Manual page 34

l_lql",l-'l-'il q +
Press _ / _ to select BEAM OPT+SOUND
OPTIMZ, BEAM OPTIMZ only or SOUND
OPTIMZ only and then press ENTER.
The following screen appears on your TV.
(< "+
1,
riP+ r r+r'"+I== T T=_IL l I
FMEFHM_+ sLIH
+ iNSIALLING==PaPailei to
hJ+li
MEIIJp_TING+ . . . 2,H EL F
REP LEI TING+. NORMRL
Bet
P'I]I iK frOrlt
0£
VSP
['1IN 2r'l "6.5£t
[ENTER ] :5t+rt
BEAM OPT+SOUND OPTIMZ
(Beam optimization and YPAO sound
optimization)
Use to optimize tile beam angle, dehty, vohnne and quality
so that the parameters best match your listening
environment.
It is recommended that you should select this optimization
feature in the following cases:
• If you make settings for the first time.
• If the unit has been relocated.
• If your listening room has been restructured.
• If the objects in your listening room (filrniture, etc.)
have been rearranged.
BEAM OPTIMZ only
(Beam optimization only)
Use to optimize the beam angle so that the parameter best
matches your listening environment.
SOUND OPTIMZ only
(YPAO sound optimization only)
Use to optimize the beam delay, volume and quality so
that the parameters best match your listening environment.
It is recommended that you should select this optimization
feature in the t_llowing cases:
• If you have opened or closed the curtains in your
listening room before using this unit.
• If you have manually set the beam angle.
0 Press _ / _ / q / [> to select and configure
each parameter and then press ENTER.
INSTALLING (Installing)
Use to select the installed position of the unit in your
listening room.
Choices:
Parallel to Wall (Parallel
with wall
installation),
Angle to Wall or corner (Corner installation)
Angle to Wall or corner
/
Parallel to Wall
• Select Angle to Wall or corner if the unit is installed in
the corner. The beam mode is set to ST+3BEAM (see
page 41).
• Select Parallel to W:dl if the unit is installed in parallel
with the wall. The beam mode is set to 5BEAM (see
page 41).
You must optimize the beam angle in the BEAM OPTIMZ only
procedure belbre starting the SOUND OPTIMZ onlyprocedure.
3O