Yamaha YSP-800 Owner's Manual page 24

|'_"tlll'l_ql["tl'_
To connect a subwoofer, connect the monaural input jack on your stlbwoofer to the monaural audio output jack
(SUBWOOFER OUT) on this unit.
If a subwoofer is connected to this unit, turn on the power of your subwoofer and then run AUTO SETUP (see page 26)
or select SWFR for BASS OUT in SUBWOOFER SET (see page 70).
Connecting to the SYSTEM CONNECTOR jack (U.S.A. and Canada models only)
When connecting a YAMAHA subwoofer equipped with a SYSTEM CONNECTOR jack, connect it to the SYSTEM
CONNECTOR jack on this unit. If the snbwoofer is connected using a system type connection, changing the power mode
of this unit controls the power mode of the subwoofer.
Subwoofer
Rear panel of this unit
®® 1
® ® ® ® ® ® ® ®
(U.S.A. and Canada models)
Cables used for connections
Subwoofcr pin cable System connector c_hle
(supplied with the YAMAHA subwooli:r with
the SYSTEM CONNECTOR jack)
20