For Canadian Customers - Yamaha YSP-800 Owner's Manual

To assure the finest perfi_rmance, please read this manual
1
carefully. Keep it in a sale place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place with at least 5 cm of space above (or below) this unit
away from direct sunlight, heat sources, vibration, dust, moisture,
and/or cold.
3 Locate tiffs unit away from other electrical appliances, motors, or
transl_rmers to avoid lmmming sounds.
4 Do not expose this unit to sudden temperature changes from cold
to hot, and do not locate tiffs unit in an environment with high
humidity (i.e. a room with a humidifier/ to prevent condensation
inside this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5 Avoid installing this unit where fi_reign object may l.dl onto this
unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
Other components, as they may calse damage and/or
discoloration on the surlhce of this unit.
Burning objects (i.e. candles), as they may cause fire, damage
to this unit, and/or personal injury.
Containers will] liquid in them, as they may l.dl and liquid
may cause electrical shock to the user and/or damage to this
unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain, etc.
in order not to obstruct heat radiation. If the temperature inside
this unit rises, it may cause fire, damage to this unit, and/or
personal injury.
7 Do not plug in Ibis unit to a wall outlet until all connections arc,
complete.
8 Do not operate this unit upside-down. It may overbear, possibly
causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet, grasp
the plug; do not pull the cable.
1] Do not clean this unit with chemical solvents: this might damage
the finish. Use a clean, dry cloth.
12 Only voltage specified on lifts unit must be used. Using this unit
with a higher voltage than specified is dangerous and may cause
tim, damage to this unit, and/or personal injury. YAMAHA will
not be held responsible for any damage resulting from use of this
unit with a voltage other than specified.
13 Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed.
The cabinet should never be opened lk_rany reasons.
14 When not planning to use this unit for long periods of time (i.e.
vacation), disconnect the AC power plug from the wall outlet.
15 Be sure to read the "TROUBLESHOOTING" section on
common operating errors before conchlding that this unit is
fauhy.
16 Before moving this unit, press STANDBY/ON to set this unit in
standby mode, and disconnect the AC power plug from the wall
outlet.
17 Condensation will lkwmwhen the surrounding temperature
changes suddenly. Disconnect the power cable fi'om the outlet,
then leaxe the unit alone.
18 When using the unit l\)r a long time, the unit may become warm.
Turn the power off, then leme the unit alone for cooling.
19 Install this unit near the AC outlet and where the AC power plug
can be reached easily.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This unit is not disconnected from the AC power source as
long as it is connected to the AC wall outlet, even if this unit
itself is turned oil This state is called the standby mode. In
this state, this unit is designed to consume a very small
quantity of power.
FOR CANADIAN CUSTOMERS
To prex ent electric shock, match wide bhlde of plug to wide
slot and fidly insert.
This Class B digital apparatus complies with Canadian ICES-
003.
IMPORTANT
Please record the serial number of this unit in the space helow.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain this
Owner's Manual in a sali: place for fimtre reli_rence.
FOR U.K. CUSTOMERS
If the socket outlets it] the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below. Note that the plug severed from
the mains lead must be destroyed, as a plug with bared
flexible cord is hazardous if engaged in a live socket outlet.
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identil_ing
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L or
coloured RED. Make sure that neither core is comtected to the
earth terminal of the three pin plug.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
CAUTION
Use ol controls or a_[justments or perform:race of procedures
other than those specified herein may result in hazardous radi-
ation exposure.
iii