Using A Pluggable Transceiver (Scp/Stp) - Siemens SIMATIC NET SFP Operating Instructions Manual

Note
Plugging and pulling during operation
The pluggable transceivers can be plugged and pulled during operation. If you have questions
on the use of SIMATIC NET products, please contact your Siemens sales partner.
Note
SCP / STP transceivers can only be used in the SCP / STP slots of the SCALANCE XM408-4C.
4.5

Using a pluggable transceiver (SCP/STP)

NOTICE
Electrostatic sensitive devices (ESD)
Plug-in transceiver are delivered in a carton. The cartons protect the plug-in transceiver against
direct contact and thus against ESD damages.
• Only unpack the plug-in transceiver in an ESD-protected mounting and installation area.
• Make sure that the corresponding safety measures are met if you use the plug-in transceiver:
• Before touching an ESD, discharge your own body. To this purpose, touch a conductive,
• Do not touch the electrical contacts of the PCB.
• Only always touch the plug-in transceiver at the metal enclosure.
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18
– They are permanently grounded via an ESD wristband.
– You wear ESD shoes or ESD shoe grounding protection strip in connection with an ESD
base.
grounded object immediately beforehand, e.g. a bare metal control cabinet part.
4.5 Using a pluggable transceiver (SCP/STP)
Assembling
21