Siemens SIMATIC NET SFP Operating Instructions Manual page 7

Network components transceiver
Table of Contents

Advertisement

Device defective
If a fault develops, send the device to your SIEMENS representative for repair. Repairs on-site are
not possible.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return
support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
Trademarks
The following and possibly other names not identified by the registered trademark sign
registered trademarks of Siemens AG:
SCALANCE, C-PLUG, OLM
Electrostatic discharge
NOTICE
Electrostatic sensitive devices (ESD)
Electronic modules contain electrostatic sensitive components
These components can easily be destroyed if handled incorrectly.
Note the following instructions to avoid damage.
• Touch electronic modules only when you absolutely need to work on them.
• If electronic modules need to be touched, the body of the person involved must first be
• Do not bring electronic modules in contact with electrically isolating materials such as
• Place the modules only on conductive surfaces.
• Pack, store and transport electronic modules and components only in their product
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18
electrostatically discharged and grounded.
plastic film, isolating table top pads or clothing made of synthetic fibers.
packaging or in a conductive packaging such as metalized plastic or metal containers,
conductive foam or household aluminum foil.
Introduction
(https://
are
®
7

Advertisement

Table of Contents
loading

Table of Contents