Siemens SIMATIC NET SFP Operating Instructions Manual page 60

Approvals
The products meet the requirements of the following standards:
• EN/IEC 60079-7, GB 3836.8
• EN IEC/IEC 60079-0, GB 3836.1
You will find the current versions of the standards in the currently valid certificates.
Note for devices with CLASS 1 LASER
Important note on products certified according to Type Examination Certificate
DEKRA 18ATEX0078 U and IECEx Certificate of Conformity DEK 18.0050 U and containing Class
1 optical radiation sources.
Note
CLASS 1 LASER
The plug-in transceivers are approved as laser Class 1 according to IEC 60825-1.
Fiber optic cables that are connected to these optical radiation sources may therefore either lead
into or through hazardous areas that require equipment of the explosion protection level (EPL)
Gb, Gc, Db or Dc.
EMC (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the electromagnetic
compatibility requirements according to the EU Directive 2014/30/EU as well as the UK-
Regulation SI 2016/1091 and their associated amendments.
Applied standards:
• EN 61000‑6‑2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity
for industrial environments
• EN 61000‑6‑4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments
You will find the current versions of the standards in the currently valid EC/UK Declaration of
Conformity.
RoHS
The SIMATIC NET products described in these operating instructions meet the requirements on
the restriction of the use of certain hazardous substances in electrical and electronic equipment
according to the EU Directive 2011/65/EU as well as the UK-Regulation SI 2012/3032 and their
associated amendments.
Applied standard:
• EN IEC 63000
60
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18