Safety Section; Safety Messages - Perkins 4008-30 Operation And Maintenance Manual

6

Safety Section

Safety Messages

Safety Section
Safety Messages
There may be several specific warning signs on your
engine. The exact location and a description of the
warning signs are reviewed in this section. Become
familiar with all warning signs.
Ensure that all the warning signs are legible. Clean
the warning signs or replace the warning signs if the
words cannot be read or if the illustrations are not
visible. Use a cloth, water, and soap to clean the
warning signs. Do not use solvents, gasoline, or
other harsh chemicals. Solvents, gasoline, or harsh
chemicals could loosen the adhesive that secures the
warning signs. The warning signs that are loosened
could drop off the engine.
Replace any warning sign that is damaged or
missing. If a warning sign is attached to a part of the
engine that is replaced, install a new warning sign on
the replacement part. Your Perkins distributor can
provide new warning signs.
Illustration 1
(1) Universal warning label locations
(2) Do not step
i06712726
(3) Hot surface label location
(4) Hot fluid under pressure label locations
SEBU9077-02
(5) Ether warning label location
g06086932