Perkins 4008-30 Operation And Maintenance Manual page 39

SEBU9077-02
(Table 3, contd)
Software Part Number
Software Release Date
Software Description
Customer Specified Parameters
Customer specified parameters allow the engine to
be configured to the exact needs of the application.
The electronic service tool is required to alter the
customer configuration parameters.
Customer parameters may be changed repeatedly as
operational requirements change.
Table 4
Specified Parameters
Rating Number
Rated Power
Rated Engine Speed
Rated Configuration
Low Idle Speed
High Idle Speed
Engine Acceleration Rate
Droop/Isochronous Selection
Engine Speed Droop
Speed Control Minimum Speed
Speed Control Maximum Speed
Digital Speed Control Ramp Rate
Digital Speed Control Installed
Engine State Control Input Configuration
Desired Speed Input Arrangement
Droop/Isochronous Switch Installed
Engine State Control Secondary Input Configuration
Governor (Proportional) Gain Percentage
Governor (Integral) Stability Percentage
Governor Transient Response Loop Gain Percentage
Security Access Parameters
Customer Password #1
Customer Password #2
Customer Specified Parameters
Enabled
Installed
CAN Input
CAN Input
Enabled
Not Installed
Operation Section
Configuration Parameters
Record
(continued)
39