Easysetup (Resettingthe Recorder) - Sony RDR-VX515 Operating Instructions Manual

Command Mode
Changes the conmmnd mode of this recorder if
other DVD equipment is assigned the same
c()mmand mnde. Be sure to match the
COMMAND MODE switch on tile remote to the
setting made here. For details, see "lf you have a
Sony DVD player or more than one Snny DVD
recorder" on page 24.
DVD 1 Select this if the defmdt
command mode conflicts
with other DVD equipment.
DVD 2 Select this if the defanlt
command mode conflicts
with other DVD equipment.
DVD 3 The def:mlt command mode
of the recorder.
Factory Setting
Allows you to return the setup settings to their
default settings. Nnte that all of your previous
settings will be Inst.
1 After step 3 above, select "Factory Setting,"
and press ENTER.
2 Select"Start," and press ENTER.
The setup settings retnrn to their def:mlt
settings.
3 Press ENTER when "Finish" appears.
The power automatically turns off and then on
again, and the recorder is reset to the factnry
settings.
Wheu the "Easy Setup" display appears.
follow the instructions fnr Easy Setup
(page 22) from step 4.
EasySetup
(Resettingthe Recorder)
Select this 1o run the Easy Selup program.
1
PressSYSTEMMENUwhile the recorderis
in stop mode.
2 Select "Setup," and press ENTER.
3 Select "Easy Setup," and press ENTER.
_ Easy 8÷tup IO:Io AM
Follow the guide to mak_ initial settings
Before you ,_talt
check that you have made all necessary connections
4
Select "Start," andpressENTER.
5 Follow the instructions for Easy Setup
(page22) fromstep5.
102