Sony RDR-VX515 Operating Instructions Manual page 51

4
Press REC NODE repeatedly to select the
recording
mode.
The display changes on tile TV screen as
R!llows:
HQ_ HSP _ SP'_- LSP
t
SEP _'_ SLP _ EP _ LP
For details about the recording mode, see
page 45.
5 Press SYSTEM MENU while the recorder is
in stop
mode.
6 Select "Setup," and press ENTER.
7
Select "Features," and press ENTER.
The "Features' setup appears.
8 Select"SynchroRecording," a ndpress
ENTER.
9 Select "to DVD," and press ENTER.
1
0 PressSYSTEM MENU to turnoff themenu.
11
Setthetimerontheconnected e quipment
tothetimeyouwanttorecord,andturnit
Off.
12
Press SYNCHRO REC.
The SYNCHRO REC indicator lights up on
lhe front panel and the recorder slands by for
Synchro-Rec.
The recorder slarls recording when a signal is
received fi'om tile colmecled equipmenl.
When tlae connected equipment I!lrns
off,
tile
recording slops and tile recorder turns off.
To stop recording
Press • STOP twice.
To cancel a Synchro-Rec standby
Press SYNCHRO REC belore recording starts.
The SYNCHRO REC indicator on the recorder
turns off.
If you press SYNCHRO REC during Synchro-
Rec, the recording stops, the SYNCHRO REC
indicator turns off, and the recorder turns off.
If the timersettings ofa Synchro-Recording
andanother t imerrecording overlap
Regardless of whether or not the program is a
Synchro-Rec program, tile program that starts first
has priority. Tile recorder starts recording the
second program about tel1 seconds aRer the first
program has finished. If tile end time of one
setting and the start time of another timer setting is
tile same. tile beginning of the program that starts
later will be cut.
7:00 8:00 9:00 10:00
Program 1 [ I
i
Program 2 I
will be cut off
• The recorder starts recording only after detecting the
video signal from the connected eguipment. Tile
beginning of the program may not be recorded
regardless of whether or not the recorder' s power is on
or off.
• To use the connected equipment during Synchro-Rec
standby, cancel the standby mode by pressing
SYNCHRO REC. To return to standby mode again, be
sure to turn off the eguipment and press SYNCHRO
REC, before Synchro-Rec starts.
• The Synchro-Rec filnction does not work with some
tuners. For details, see the tuner's operating
instructions.
• During Synchro-Rec standby, the Auto Clock Set
fimction does not work (page 94).
• Alter a recording has finishe& Ihe recorder enters the
Synchro-Rec standby mode until the SYNCHRO REC
indicator turns off.
• If Synchro-Rec starts with the recorder turned on, the
recorder will turn off when the recording ends.
• The recorder does not record programs with Copy-
Never signals. Such recordings stop after a few
seconds.
i,
51