Changing The Nameof A Title - Sony RDR-VX515 Operating Instructions Manual

Changing the Nameof a
Title
You can enter a title name of up to 32 characters.
Since the displayed number of characters is
limited, their appearance in menus such as Title
List may be difli_rent. When the display for
entering characters appears, follow the steps
below.
DVD "-'@ oC_D Z;
!
iiii ii
ORIGINAL/
PLAYLIST ,,,,,,,_@
TITLE LIST
t/,!,/_.i/._,
ENTER
d% RETURN
1
Press DVD to operate the DVD recorder.
2
PressTITLE LIST.
When editing a DVD-RW (VR mode), press
ORIG1NAL/PLAYLIST to switch to Ihe
"Title List (Original)," if necessary.
3
Select a title, and press ENTER.
The suh-lnenu appears.
4
Select"Title Name," andpress ENTER.
The "Title Name" display appears.
Cursor Input row
[]
Select the character you want to enter
using'IHI,/€,-/,,_, andpressENTER.
Tire selected character appears in the input
row.
You can only enter characters and symbols
that are displayed.
• To change the cursor position, select the
input row using _, and press _/.i_.
• To erase a character, select either of the
lkqlowing setting buttons and press ENTER.
"Backspace": Erases the character to the lel:
of the
CLIFSOr.
"Delete": Erases the character at the cursor
position.
"Clear": Erases all the characters in the input
row.
• To insert a space, move the cursor to tire
desired position, select "Space," and press
ENTER.
• To insert a character, move the cursor to the
desired position, select the character, and
press ENTER.
Repeat step 5 to enter the
remaining
characters.
To return to the Title List without remuning
the title, press d'-'_RETURN.
Select "Finish," and press ENTER.
-_i- Hint
You can also rename a disc (page 66). Follow steps 5 to
7 abo',e when the 'Disc Nanle" display appears.
Setting buttons Character palette
6O