Toshiba MMY-MUP0721FT6P-UL Service Manual page 134

<RBC-AWSU**>
Basic procedure
Be sure to stop the air conditioner before making settings.
(Change the setting while the air conditioner is not
working.)
1
Push the [ Menu] button to display the
menu screen
2
Push and hold the [
the [ ] button at the same time to
display the "Field setting menu".
→Push and hold the buttons for more than
4 seconds
3
Push the [ ] / [
"9.DN setting" on the "Field setting menu"
screen, then push the "
[ Set / Fix] button.
4
Push the [ ] / [
the indoor unit and push the
" Set" [
→The fan and louver of the indoor unit operate.
When the group control is used, the fan and
louver of the selected indoor unit operate.
→Move the cursor to select "Code(DN)" with the
" " button, then set
"Code(DN)" with the [
→Move the cursor to select "Data" with the
" " button, then set "Data"
with the [ ] / [
▼ (Refrigerant line address)
5
Push the [ ] / [
to select Code No. Change Code No. to 12 with
[ ] / [ ] setting buttoon.
6
Push the [ ] / [
to select the Date. Set the system address with
[ ] / [ ] setting buttoon.
(Match the address with the address on the interface
P.C.board of the header outdoor unit in the same
refrigerant line.)
7
Push the " Fix"[
the other Code(DN) and Data. After "Continue?" is
displayed on the screen, push the
" Yes"[
- 134 -
Menu] button and
] button to select
Set"
] button to select
Set / Fix] button.
] / [ ] button.
] button.
] button
] button
Set / Fix] button to set
Set / Fix] buttoon.