Focus (Auto/Manual Focus) - Panasonic Palmcoder PalmSight PV- L571 Operating Instructions Manual

Focus
Before you begin...
* Connect Camcorder to power source.
• Set POWER to CAMERA.
Camcorder automatically focuses on subject even during zooming.
Auto Focus is on when "MP" is not displayed in EVF or LCD monitor.
Press MANUAL FOCUS to remove "MF" in EVF or LCD monitor if necessary.
Use Manual Focus (MF) when :
* recording through glass.
* lighting is poor.
* subject is far away with objects in foreground. EVF or LCD Monitor
* subject has distinct horizontal lines.
* subject is not centered in EVF or LCD monitor. MF
* subject has a shiny surface.
* subject is slanted.
* subject is bright and flat, like a white wall.
• subject has fast motion, like a golf swing.
1 Press MANUAL FOCUS so "MF" (Manual
Focus) appears in EVF or LCD monitor.
2 Hold down "Т" (telephoto) on POWER
ZOOM to maximum zoom in.
3 Press UP A (FAR) or DOWN Y (NEAR)
until subject is in focus.
• Back away from subject if necessary.
4 Hold down "W" (wide angle) on POWER
ZOOM as desired.
• Refocus as needed
when aiming at new scenes.
OCUS ТТЕ
TRES
Auto Focus functions up to 12.7 mm (1/2 inch) from subject.
Hold down ^W" on POWER ZOOM to maximum wide angle.
Bring Camcorder up close to the subject.
23