Table of Contents
Advertisement
Built-in Auto Light
Before you begin...
* Connect Camcorder to power source.
Set LIGHT to AUTO.
Light turns on/off automatically according
to lighting conditions.
Or, set LIGHT to ON/OFF manually.
3D LIGHT
ON OFF AUTO
=D appears in EVF or
Note:
LCD monitor when
* Using Light reduces battery operating time.
Light is on.
* Provide proper ventilation when using
12:00:00AM
JAN
12001
Light extensively in a hot environment.
* Using Light when the Camcorder is
powered by a car battery may shorten bulb
life.
Light becomes hot. Never cover Light
e Set Light to OFF when not in use.
while on.
Caution:
Before you begin...
e Order Part No. VULS0001 (VLLW0015 and
cushions) for replacement bulb unit.
• Set POWER to OFF.
1 Press in on both sides of lens cover
and pull straight out and off.
2 Using Tweezers or needle-nose
pliers, carefully remove bulb.
e Take unit to service center if you need
assistance.
3 Replace bulb using a clean cloth or
tissue. (Do not touch with fingers.)
d Replace lens cover.
Note:
e Handle bulb gently. Excessive force may
cause bulb to crack.
DANGER:
Use only replacement bulb (PART NO. VLLW0015) supplied by Panasonic to reduce
risk of fire.
Handle new bulb with cloth or tissue as skin oils will decrease bulb life.
Remove lens cover and allow bulb to cool before replacing to avoid possible burn
hazard.
15
Advertisement
Table of Contents
