Built-In Auto Light (Pv-I.5511Pv-L601/Pv-L651 Only) (Using The Light) - Panasonic Palmcorder PalmSight PV-L501 Operating Instructions Manual

Built-inAuto Light(PV-L551/PV-L601/PV-L651 only)
For recording in dim lighting.
Note:
• Using Light reduces battery operating time.
• Provide proper ventilation when using
Light extensively in a hot environment.
• Using Light when the Camcorder is
powered by a car battery may shorten bulb
life.
• Set Light to OFF when not in use.
I
Before you begin...
• ConnectCamcorderto powersource.
• SetPOWERto CAMERA
Set LIGHT to AUTO.
Lightturns on/offautomaticallyaccording
to lightingconditions.
Or, set LIGHT to ON/OFF manually.
=-- _- _E) appears in EVF Or
| LCD monitor when
] Light is on.
!
I.
1 _,OOl
I Lcauti°n: I
ight becomeshot.Nevercover Light
hileon.
4
3
Before you begin...
• Order Part No.VULS0001(VLLW0015and
cushions)for replacementbulbunit,
• SetPOWERto OFF.
Press in on both sides of leas cover
and pull straight out and off,
Using Tweezers or needle-nose
pliers, carefully remove bulb.
• Take unit to servicecenter if you need
assistance.
Replacebulb usinga cleanclothor
tissue.(Do not touchwith fingers.)
Replace lens cover.
Note:
• Handle bulb gently. Excessiveforce may
cause bulb to crack.
ruDANGER:
I
se only replacementbulb (PART NO, VLLW0015) suppliedby Panasonic to reduce |
Ifisk of fire, ,,
I
I Handle new bulb with cloth or tissue as skin oils will decrease bulb hre.
_ Remove lens coverand allow bulb to cool before replacingto avoid possibleburn
Lhazard.
15