Optical Fiber Cable Specifications - Mitsubishi MELSEC-A AJ71PT3 User Manual

3. SPECIFICATIONS
3.2.2 Optical fiber cable specifications
IMELSEC;4
I
Item
Specifications
Applicable optical cable
Plastic fiber cable
Cable transmission loss
260 dB/km (853 dB/kit)
Minimum optical transmission level
-15 dBm
Maximum optical transmission level
-31 dBm
Optical wave length
660 nm (Visible radiation)
Optical fiber 00
1000" m
Connector
1-core connector
Minimum allowable bend radius"
25mm(0.98inch) max."
Table 3.2 Optical Fiber Cable Specifications
e .
Applies to the stand-alone remote
110
units which are wired inside the casing .
The following optical fiber cables available from Mitsubishi
conform to the specifications in Table 3.2:
Type Remarks
M-2P- ,:; M-A
PVC coated core cable (standard cable for indoor use,
conforming to
Ul
standard)
Reinforced PVC coated core cable (reinforced cable for
M-2P- ::; M-B
indoor use)
Cable diameter 5.0mm(O.20inch)
M-2P- ::; M-C
PE coated core cable (standard cable for indoor use)
Cable diameter 2.2mm(0.09inch)
Table 3.3 Optical Fiber Cables
Enter the cable length (m) required in
~:;.
Example: PVC coated core cable of 40m(131ft) length
M-2P-40M-A
3-4
•
•
18 (NA) 66164-A