Harman Kardon AVR 220 Owner's Manual page 15

Installation and Connections
4. Connectthe digital audio outputsof a DVD
player,satellite receiver, c able box or HDTV con-
verterto the appropriateOptical or Coaxial
Digital Inputs _I_'ti_!.
5. Connect the Video Monitor Output _)
jacks on the receiver to the composite or
S-Video input of your television monitor or
video projector
Video Connection Note:
• Composite and S-Video signals may only be
viewec in their native formats. S-Video inputs
may only be viewed when the AVR 220 is
connected to a TV set or video display with
S-Video capability.
Power Connections
Thisunit isequippedwith two accessory A C
outlets.Theymay be usedto power accessory
devices,but they shouldnot be usedwith high-
currentdraw equipmentsuch as powerampli-
fiers.Thetotal aowerdraw to eachoutlet may
not exceed100watts.
TheSwitched AC AccessoryOutlet _) will
receivepower only when the unit is on. This is
recommended for devicesthat haveno power
switchor a mechanicapower switchthat may
be left inthe "ON" 3osition.
NOTE:Manyaudio andvideo productsgo into
a Standbymodewhen they are usedwith
switchedoutlets,and cannot be fully turned on
using the outlet alonewithout a remotecontrol
command.
TheUnswitched ACAccessoryOutlet
will receivepower as long asthe unit is
pluggedinto a powered AC outlet.
:inally,when all connections are complete,plug
the Power Cord _ nto a nonswitched120-
volt AC wall outlet.You'realmost readyto enjoy
the AVR220!
15 INSTALLATION AND CONNECTIONS