Harman Kardon AVR 225 Quick Start Manual
Harman kardon avr 225: quick start
Hide thumbs
Also See for AVR 225:
- Service manual (96 pages) ,
- Owner's manual (58 pages) ,
- Reference manual (1 page)
Advertisement
Quick Links
Power for the Digital Revolution
Thank you for purchasing a Harman Kardon AVR 225. This Quick-Start Guide
will help you with a basic system installation. For detailed information on any step
in this Guide, please refer to the pages referenced in the Owner's Manual.
We strongly recommend that you read the Owner's Manual for complete details
on how to install, configure and operate the AVR 225, as well as for the
important safety information it contains.
Figure 1 – Speaker Placement
The colors shown for each speaker correspond to
the matching output terminal connection on the back
of the AVR 225 (see page 14).
Connections Color Guide
Audio Connections
Left
Front
Center
Surround
Subwoofer
Digital Audio Connections
Coax
Optical
Video Connections
Composite
S-Video
Match the colored jacks on the AVR 225 to the appropriate
jacks on your source equipment or speakers. The colors are
standardized, but not all equipment or connectors use them.
SPEAKER PLACEMENT
®
®
.
FRONT
LEFT
SPEAKER
(White)
SUBWOOFER
(Purple)
Right
FRONT
RIGHT
SPEAKER
CENTER
SPEAKER
(Green)
(Red)
SURROUND
LEFT
SPEAKER
(Blue)
Step 1. Place your speakers in the listening room
SURROUND
RIGHT
SPEAKER
(Gray)
(see page 16).
Advertisement
Related Manuals for Harman Kardon AVR 225
Summary of Contents for Harman Kardon AVR 225
- Page 1 Guide, please refer to the pages referenced in the Owner’s Manual. We strongly recommend that you read the Owner’s Manual for complete details on how to install, configure and operate the AVR 225, as well as for the important safety information it contains.
- Page 2 LINE IN/SUB/LFE SUBWOOFER Step 2. Connect the speakers to the receiver: Red (+) on speaker to colored (+) on receiver and black (–) to black (–). (See page 14.) Step 3. Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer (see page 16).
- Page 3 Step 6. Plug all components into AC power outlets. The outlets on the back of the AVR 225 may be used only for low-current products, such as CD or DVD players, as long as the total does not exceed 100 watts.
- Page 4 TV or Projector Video 2 or 3 Check with your cable company to make certain that digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections. AVR 225 QUICK-START GUIDE Video S-Video...