Transport - Siemens SENTRON 3WL10 Equipment Manual

additional rights apply, if the relevant LGPL license criteria are met: (i) you are entitled to
modify the Combined Product for your own use, including but not limited to the right to
modify the Combined Product to relink modified versions of the LGPL Licensed Module, and
(ii) you may reverse-engineer the Combined Product, but only to debug your modifications.
The modification right does not include the right to distribute such modifications and you
shall maintain in confidence any information resulting from such reverse-engineering of a
Combined Product.
Certain OSS licenses require SIEMENS to make source code available, for example, the GNU
General Public License, the GNU Lesser General Public License and the Mozilla Public License.
If such licenses are applicable and this Product is not shipped with the required source code,
a copy of this source code can be obtained by anyone in receipt of this information during
the period required by the applicable OSS licenses by contacting the following address:
Siemens AG
Smart Infrastructure
Electrical Products
Technical Support
Postfach 10 09 53
93009 Regensburg
Germany
You will find Technical Support under (https://www.siemens.com/support-request).
Keyword: Open Source Request (please specify Product name and version, if applicable)
SIEMENS may charge a handling fee of up to 5 EUR to fulfil the request.
Warranty regarding further use of the Open Source Software
SIEMENS' warranty obligations are set forth in your agreement with SIEMENS. SIEMENS does
not provide any warranty or technical support for this Product or any OSS components
contained in it if they are modified or used in any manner not specified by SIEMENS.
The license conditions may contain disclaimers that apply between you and the respective
licensor. For the avoidance of doubt, SIEMENS does not make any warranty commitment
on behalf of or binding upon any third-party licensor. The Open Source Software used
in the product and the license agreements concerning this software can be found in the
Readme_OSS.
1.5.2

Transport

Transport
Unpack the circuit breaker or the guide frame when it is delivered and examine it for damage in
transit. Notify the carrier immediately if any damage in transit is found.
If the circuit breaker or the guide frame will not be installed until later, store it in its original
packaging. Always use the original packaging for onward shipping.
3VA27 molded case circuit breakers & 3WL10 air circuit breakers
Equipment Manual, 10/2023, L1V30499596002-03
Introduction
1.5 Safety instructions
13