Table of Contents
Advertisement
Transport, storage and packing
Lifting gear
Transport weight
Stacking height
Load securing
Intermediate storage
Transporting with packing
9229 0025 176 0E
2021-11-15
Transport
WARNING
Unsuitable lifting gear! Incorrectly dimensioned fixing gear or incorrectly adjusted
lifting gear may cause the transport unit to fall down.
•
Do not stand below suspended loads.
•
Select lifting gear, transportation and fixing gear according to the weight of the
transport unit, including any packing, such as transport pallets.
•
Observe transport symbols.
Refer to the delivery documents for the weight of the transport unit.
Note
Maximum stacking height exceeded! Damage to the bottom transport unit due to
excessive weight.
•
For transport, no more than 3 identical transport units may be stacked on top of
each other.
•
Observe loads specified on the transport unit.
Note
Unsecured transport cargo! The transport unit may slip or fall down.
Secure the load for transportation so that the transport unit cannot slip or fall.
Place the transport unit on a level, non-slip and pressure-resistant surface for inter-
mediate storage.
Transport the vacuum circuit-breaker to the installation site or storage location in its
original transport unit.
Transporting with a crane or fork-lift truck
Fig. 1
Transporting the pallet with box
Transport the transport unit to the installation site or storage location:
•
with a fork-lift truck or
•
with sling gear suspended from a crane
-
at a spreading angle of approx. 60° or
-
with cross-members.
Transport, storage and packing
9
Advertisement
Table of Contents
