Adjust Volume; Other Alert Rings - Geemarc CL9000 Manual

Profiles
• Talking keypad
Menu/OK
Talking CID
When this function is activated, then pressing the numeric keys
on the keypad, the phone will announce the number you pressed.
When you receive a call, the phone will announce all incoming
telephone number.

Adjust volume

Menu/OK
or use the short key up
You have the possibility to set:
Incoming ringtone: to set the incoming ringer volume.
Message ringtone: to set the ringer level when you receive a
new message.
Alarm ringtone: to set the ringer level for your alarm.
Speaker volume: To set the volume of the speakerphone level.
Handset volume: To set the receiving volume for the handset.
Power ringtone: To set the volume of the animation when you
turns on or off your phone.
Talking keypad: to set the level of the voice when you press
one key.
Note: Use Left(
desired and press
The level position 0 is to set the volume on OFF position.
During conversation:
( and ) to change handset receiver or Speaker volume
(if the call is in Speakerphone mode).

Other alert rings.

Menu/OK
•
Battery low alert:
beep alarm information and 2 SMS to the desired contact.
Profiles
Profiles Adjust volume
to access at the different function below.
) / Right(
to valid.
user can press Up or Down volume key
Profiles other alert rings
when the battery is low, the phone send a
21
OK Ring settings
) key to set the correct level
OK