Table of Contents
Advertisement
=o
[ap)
iE MUSIC SCAN button
ERASE: Press to erase a start ID. When a start ID and
Press to listen to the beginning of each selection
@ program number are written on the tape, both
successively.
ar are simultaneously erased by pressing this
utton.
[14] FADER button
RENUMBER: Press to renumber all programs on the
Press to fade in or fade out during recording or
tape. When only the start IDs are written, pressing
playback
this button will insert the proper program numbers
:
beginning with "1". The tape will rewind and start
hE MARGIN RESET button
from the beginning to accomplish this function.
Press to reset the margin of peak level.
fig CLOCK SET button
P
H
n
-
cha
es
°
. :
6]
END ID buttons
ress to adjust the time of the clock built in this unit
In this mode, the 0 button and the 9 button function as
WRITE: Press to write the ID signifying the end of
the + and - buttons respectively.
playback or recording.
ERASE: Press to erase the end ID.
20 PRESENT button
Press to display the current time.
Each time the RECORDED or PRESENT button is
pressed, day, month and year display, the day of the
week display or hour, minute and second display is
switched sequencially.
SKIP ID buttons
WRITE: Press at the beginning of the portion you may
wish to skip later. A skip ID will be written from the
point where you pressed this button.
ERASE: Press to erase the nearest skip ID which is
before the current position.
PA RECORDED button
|
Press to display the recording
day of the tape bein
[9 START ID buttons
es
aaa
ed
pee
AUTO: Press to turn on and off the AUTO indicator.
When the AUTO indicator is lit, the start /D will
CLEAR button
automatically be written during recording. When the
F
AUTO indicator is not lit, press the START ID WRITE
piece t) Conce: Ine Drogiany nummer Wacirnes
button at the point where you want to write a start ID.
been mistakenly entered.
WRITE: Press to write the start ID at the desired point
during recording or playback.
Advertisement
Table of Contents
