Table of Contents
Advertisement
End ID
This signal indicates the end position of a
recording.
@ When you do not want to listen to the very end
of a tape, record the end ID at the beginning
of the portion you do not want to play. When
the end ID is detected during playback,
playback stops and the tape is rewound to the
beginning automatically.
@ When recording new material on a recorded
tape, you can write an end ID at the end of the
re-recorded portion. This will help you easily
find the position to start recording the next time
when you want to record other material onto the
same tape.
Like a start ID or skip ID, end ID can also be
erased later.
During playback, the tape is automatically rewound to the
beginning.
Recorded tape
When recording
new material onto
the same tape
Portion where you have not made a second recording
(This first recording has not be erased.)
@® When an end ID which has been written is
detected during locating selections or rehearsal
playback of start ID or skip ID, the unit stops at
the beginning of the end ID.
Absolute time
The absolute time indicates the position of the tape,
giving the time elapsed from the beginning. The
absolute time is recorded automatically at the same
time the audio signal is recorded. It cannot be re-
recorded. The absolute time allows you to confirm the
elapsed time from the beginning of the tape.
When using the sub codes
Things that can be done
Locating a selection (AMS function)
Listening to the first portion of selections sequentially
(Music Scan)
Choosing a selection directly
Programming desired selections in a desired order
(RMS play)
Skipping the portion not desired
Looking for the position at which the recording or
playback ends
Checking the recording date and time
"wy, ese
yy
{
End ID
The position at which
the tape stops.
Program time
This is the time elapsed for a selection.
The date function (Recording a date)
With the built-in clock, the day, the day of the week and
time of recording are automatically recorded.
Required sub code(s)
Start ID/Program number
Start ID/Program number
Skip ID/Start ID
Date (It is recorded automatically.)
a7
Advertisement
Table of Contents
