Table of Contents
Advertisement
laicerelaeliare
Note on the INPUT selector and the REC MODE selector
Do not change the position of these selectors after
recording starts. If you do, the wrong "PGM TIME"
information may appear in the display window.
Note on the SBM switche
To obtain uniform characteristics in the recorded sound, do
not change the setting of the SBM switch after recording
starts.
If the cassette is ejected after it has been loaded
Check to see if the cassette is inserted correctly. (See page
19.)
When the tape is recorded to the end (Auto rewind
function)
The tape is rewound to the beginning and stops
automatically.
The auto rewind function is not applied when the TIMER
switch ts set to the REC position.
Accuracy of the electronic linear time counter
The linear time counter provided with this unit is not a clock.
The time indicated by the counter may differ slightly from
the actual recording/playback time.
moms} Cold-m talcum atcrere)
cel tale Or:)(cm-lare ml Mlaal=
Once the built-in clock is set, the day, the day of the week
and time of recording will automatically be recorded on the
tape along with the audio signal. When playing the tape
back later, you can display this information to check when
the tape was recorded.
To check the day, the day of the week and time being
recorded, press the PRESENT button to display the current
date and time.
Note
If you use another DAT deck to record subcodes (using the
renumbering function, etc.) on a tape initially recorded on
this unit, the recording date and time data may be erased
from those sections of the tape.
22
To Check the Recording Date and Time
During playback you can check the recording day. the day
of the week and time which was recorded on the tape at the
same time the audio signal was recorded (No display will
appear if the recording date and time are not recorded on
the tape.)
To display the recorded date and time. press the
RECORDED button. Each press of the button changes the
display according to the following sequence.
week of recording
-
Toa%e
To check the current date and time
Press the PRESENT button. The day. the day of the week
and time are displayed in the same way as with the
RECORDED button.
Advertisement
Table of Contents
