Table of Contents
Advertisement
|Molersh dle) amare m al Ulavejiie)aime) m Ore) alige)
To turn off the display window
When the power is turned on, the display window also is
turned on. During recording or playback, all display or
some parts of the display can be turned off as follows:
When operating with the front panel controls
While pressing the COUNTER MODE button, press the 0
button.
When operating with the remote commander
Press the DISPLAY MODE button.
Each time you press the above buttons, the indicators
change as follows:
Normal indicators
¥
Peak level meters and margin indicators go off.
(The DISPLAY OFF indicator lights.)
+
All the indicators go off during recording or playback'.
(The DISPLAY OFF AUTO indicator lights momentarily
just before the indicators go off.)
°
When pressing the COUNTER MODE or DISPLAY MODE button
except during recording or playback. the DISPLAY OFF AUTO
indicator lights In this case, all the indicators go off immediately
after recording or playback starts.
To change the brightness of the display window
While pressing the COUNTER MODE button on the front
panel or the COUNTER MODE button on the remote
commander, press one of the numeric buttons 1, 2 and 3.
The greater number pressed, the darker the display
window becomes.
10
DISPLAY
MUSIC SCAN
CAUTION
SKIPPLAY
-— STAATID —;
ALL
OFF AUTO
STEP
COPY
;
PE
32kHz
PGMNO.
RMS AMS
PROHIBIT
| SreMMseR
7
44.1kH2
8 8
pan
CE
ITE ERASE |
B B
48kHz
—
Lew
—
co
SKIPID
— |;
-CBoo
60
40
20
2
6
4
2
0 OvER
REHEARSAL;
EF
t
errr
eer
s
—
8. iS i
! | WRITE E ERASE
:
TOP
a
Mio
a
ENO
MARGIN
| WRITE ERASE
(1) LONG play mode indicator
Lights when recording or playback 1s being performed
in the long play mode
[2] TOC (Table Of Contents) indicator
When a pre-recorded DAT cassette is played back.
this indicator will light
[3] DATE indicator
Lights when the RECORDED button is pressed to
display the recording day of the tape being played
Flashes when the PRESENT button 1s pressed to
display the current time
[4] REMAINING (remaining time): Lights when the
counter shows the remaining time of the tape
PGM TIME (program time): Lights when the counter
shows the elapsed time of the current selection
ABS TIME (absolute time) indicator: Lights when the
counter shows the elapsed time from the beginning
of the tape.
[5] Time indicator
Indicates the tape running time. absolute time.
elapsed time of the current selection, remaining time
or recording day. Each time the COUNTER MODE
button is pressed. the display is changed
[6] Fade in/out indicator
"a : Flashes when recording or playback fades in
= *
:Flashes when recording of playback fades out
AM/PM indicators
Show AM or PM of the time
Advertisement
Table of Contents
