Connection - Icom IC-RSOOCOL Instruction Manual

31
5 SYSTEM INTERCONNECTIONS
5-5 REMOTE JACK INFORMATION
@TRANSCEIVE FUNCTION
An Icom CI-V transceiver or radio can be connected via the
[REMOTE] jack, The frequency and mode become the same
when either radio is changed,
[REMOTE]
iii
eid >
Connect ACC socket pin 3 when the IC-R9O0OL is connected
with a transceiver. This connection mutes the IC-R9OOOL
when the transceiver transmits.
@CI-V CONDITION SCREEN
usp MID BANK
2,000.00 ooonm
Ts 10 nz
[CI-V REMOTE CONTROL CONDITION)
with MAIN DIAL
Default or User SET
My Address (01H-7FH)
=> Baude Rate
=> Transceive Function
=> Transceive with
10-731/735
The [REMOTE] jack on the rear panel is an input/output
port for control of the IC-R9OOOL frequency, mode, memory
channel, etc. Using the [REMOTE] jack, the 1C-R9OOOL can
be controlled by a personal computer" or another Icom
Cl-V transceiver.
*An optional CT-17 Cl-V LEVEL CONVERTER is neces-
sary. Use a personal computer equipped with an RS-232C.
serial output port. See basic sample software descriptions
in the CT-17 instruction manual.
®@CT-17 CONNECTION
Up to 4 Icom CI-V transceivers can be connected to a per-
sonal computer via the CT-17,
4
computer
ecu
The IC-R9OOOL has standard default data for Cl-V control.
However, this data can be changed using the CI-V condition
screen if desired.
1) Select the Cl-V condition screen:
- Push [F-2] "Cl-V" when the menu 2 screen is dis-
played.
2) Push and hold [F-1] "'DE/U" then rotate the main dial
to select the "USER" condition for changing data,
3) To change the address number, push and hold [F-2]
"ADDR" then rotate the main dial,
© Address numbers 01H ~ 7FH can be selected,
4) To change baud rates, push and hold [F-3] "BAUD"
then rotate the main dial.
Baud rates at 300, 1200, 4800 and 9600 bps can be
selected.
5) To turn OFF the transceive function, push and hold
[F-4] "TRCV" then rotate the main dial.
6) To change the frequency data length to 4 bytes, push
and hold [F-5] "731" then rotate the main dial.
e"WITH": Transceive with the IC-735.
Sea Transceive with another Icom radio.
7) Push [F-6] "MENU" to return to the menu 1 screen.