Clock Adjustment - Icom IC-RSOOCOL Instruction Manual

3-12 DAILY TIMER SET (2) SCREEN
MID BANK
2000.00 coon
Ts 10 we
(DAILY TIMER SET] with MAIN DIAL
SEL DAY ON
To access this screen from MENU 1, push [F-4] "TIME" then
(F-2] "TIMER" then [F-3] "SET." (p. 57)
3-13 CLOCK ADJUSTMENT (1)
SCREEN
BANK
USB MID
2.000.000 ooon
Ts 10 tz
with MAIN DIAL
[CLOCK ADJUST)
Year
DATE =) Month & Date
DAY => Day
CLK1 => Hour & Min & oads| 1 2:0 Ooo
CLK2 =) Hour & Min
NOTE => Comment Write
DAY CLK 2] [NOTE ] [MENU
[e9-03-31 FRI
To access this screen from MENU 1, push [F-4) ''TIME" then
push [F-3] "ADJ." (p. 55)
LCD MONITOR SCREEN MENU 3
Sets the ON/OFF time, day and memory channel of the
selected daily timer on the daily timer (1) screen.
"DAY" To set the day for the timer, push and hold
(F-1] the switch then rotate the main dial.
"BLANK"
[F-5]
To operate the timer every day, push and
hold "BLANK" then push this switch,
To set the power ON time, push and hold
the switch then rotate the main dial.
To set the power OFF time, push and hold
the switch then rotate the main dial.
To operate the timer for only power ON,
push and hold "BLANK" then push this
switch,
To set a memory channel on which the
timer turns ON, push and hold the switch
then rotate the main dial.
To use the operating frequency when
power is ON, push and hold "BLANK"
then push this switch.
To make blank, push and hold the switch
then push "DAY," "OFF" or "M ch."
"DATE" To set the month and date, push and hold
(F-1] the switch then rotate the main dial.
To set the year, push and hold the switch
and "DAY" then rotate the main dial.
"DAY" To set the day, push and hold the switch
[F-2] then rotate the main dial,
"CLK 1"
(F-3]
Sets the seconds at 0.
To set the time of clock 1, push and hold
the switch then rotate the main dial.
"CLK 2"
[F-4]
To set the time of clock 2, push and hold
the switch then rotate the main dial,
"NOTE"
[F-5]
Accesses the clock adjustment (2) screen,
"MENU"
(F-6]
he
Returns to the menu 1 screen.
'