Memory Channels - Icom IC-RSOOCOL Instruction Manual

8 MEMORY CHANNELS
8-1 MEMORY CHANNEL SELECTION The IC-R9O0OL has a total of 1000 memory channels (10
groups of 100 memory channels) and 20 programmable
scan edge channels separate from the memory channels.
Each memory channel stores a frequency, mode, filter
width and tuning step.
Memory channels 900 ~ 999 are used for auto write
memory scan. See p. 54 for details.
(1) USING THE CHANNEL SELECTOR 1) Push a [MEMORY BANK] switch, [DOWN] or [UP] to
select the desired memory bank (100-unit channel
number).
[MEMORY BANK]
2) Rotate the [DN UP] selector to select the desired
memory channel.
eWhen "BANK" js displayed on the right top of the
CRT display, the [DN UP] selector cannot select
memory channel in another memory bank. See p, 40
(4) MEMORY BANK for details.
[DN UP]
(2) USING THE KEYBOARD 1) Enter the desired memory channel number using the
keyboard.
2) Push the [M-CH] key.
When entering more than 3 digits, the last 3 digits are
entered.
[EXAMPLES]
* Selecting memory channel 123.
Push keys COGIGI Cee]
Frequency readout + 1,23 o00ch 10.000.00 123ch
[ Recenter
* Selecting memory channel 21.
Push keys GIGI Cee]
Frequency readout » .21 123ch 10.000.00 o21ch
«When more than 3 digits are entered.
Push keys 4 co A Cee]
1.234.56 o21ch
10.000.00 456ch Frequency readout