System Interconnections - Icom IC-RSOOCOL Instruction Manual

8
5 SYSTEM INTERCONNECTIONS
5-3 FSK TERMINAL UNIT If you require FSK reception such as RTTY or FAX,
external demodulator is necessary. Connect the AFSK
input jack of the demodulator to the [ACC] socket or the
[LINE OUT] jack on the rear panel.
If the demodulator has ASCII code (RS-232C level) output
or video output, the demodulated signal can be displayed
on the CRT monitor
FSK TERMINAL UNIT
FAX DEMODULATOR )
DATA DEMODULATOR
qoo00s OS
AF input ASCII OUTPUT ©
al (AFSK input)
\
|
!
|
H To indicate the FSK signal,
| Connect one of 3 output
| terminals when the demodu-
' lator has no display.
|
|
@ DATA FORMAT SCREEN When an external FSK demodulator has ASCII code
(RS-232C level) output, the terminal monitor screen can be
used for FSK monitoring. Format the monitor system to
the external demodulator using the data format screen.
1) Selects the data format screen:
- When the menu 2 screen is displayed, push [F-1]
"TERM," and then push [F-3] '""FORMT."
USB MID BANK
2.000.000 Oo0Ocw
Ts 10
(72:09)
2) To select 7 or 8 bit data, push and hold [F-1] "BIT"
then rotate the main dial.
[TERMINAL MONITOR]
3) To select the baud rate, push and hold [F-2] "BAUD"
i dal le la then rotate the main dial.
BIT => Data bit 7 eit pid
BAUD => Baud Rate [3008] 6008 12008 24008
CODE => CR & LF Code CR only
4) To select the line feed command, push and hold [F-3]
"CODE" then rotate the main dial.
CR: carriage return LF: line feed
(err) (eave) feove] (—)] C) Gser
5) Push [F-6] "SET" to return to the terminal monitor
screen.
6) When no ASCII code is received, the demonstration
Operates on the screen. As soon as the ASCII code is
received, the screen clears and displays the incoming
data.