Playing Back; Finding A Scene You Want To Play Back - Panasonic Digital Palmcorder PV-DV901 Operating Instructions Manual

Playing Back
The recorded scene can be played back immediately after recording.
1 Slide the [OFF/ON/MODE] Switch and set the Palmcorder in
the VCR Mode.
© The [VCR] Lamp lights up. @
2 Press the [44] Button to rewind the tape.
© Rewind the tape to the point where you want to start playback,
; e When the tape reaches the beginning, rewinding stops automatically. |
}: 3 Press the [>] Button to start playback.
To Stop Playback
Press the [@] Button @.
if a Cassette recorded with copyright protection signals is played back, the
screen becomes blue or mosaic-like noise patterns.
i Adjusting the Sound Volume
Until the [VOLUME] Indication 3) appears, keep pressing the [PUSH] Dial
©. Then, rotate the [PUSH] Dial to adjust the volume. After the adjustment,
press the [PUSH} Dial to make the [VOLUME] Indication disappear.
To adjust the volume with the Remote Controller, press the [T] or [W] Button
to display the [VOLUME] Indication. Press the [T] Button to increase the
volume or press the [W] Button to decrease the volume. The [VOLUME}
Indication goes off 2 or 3 seconds after the adjustment is finished.
| When the Playback Zoom Function is in use, the sound volume cannot be
VOLUME (-1{1({-<-- {+} adjusted.
® For other notes,.see page 53.
at Ping Ang fing Ang Png Hing Ping Fang Ang tng Feng tng Png fing Ong Pag Mag Pag Mag Png Pap Map Bag fing Bag Mgt Pag Mad Pet Pt ed
Finding a Scene You Want to Play Back
GJ Cue/Review Playback
Cue Playback (@)
Keep the Cue Button [>] @ pressed during playback.
Review Playback
Keep the Review Button [44] @ pressed during playback.
¢ For longer Cue or Review Playback, press the Cue Button [>] or the
Review Button [44 } only briefly. As this locks the search function, you do
'not need to keep the button pressed for a long time.
@ To resume normal playback, press the Play Button [j. In Cue and Review
Piayback, pictures with fast-moving subjects may contain mosaic-like noise
patterns.
Wi Variable Speed Search Function
; The speed of Cue Playback or Review Playback can be varied.
MITTEN 1 During playback; press the [>] Button.
®[1XC] Indication appears. ©) ;
2 Rotate the [PUSH] Dial and select a desired search speed.
The following 6 playback speeds are available for the Variable Speed Search
Function in both the fast-forwarding and rewinding directions. 1/5 X (slow
playback, SP mode only), 1/3 X (slow playback, LP mode only),1 X,2 x, 5
X, 10 X, and 20 xX. .
e The same setting can be performed using the Remote Controller.
Resuming Normal Playback
Press the [> } Button. ;
@ During Cue or Review Playback, fast-moving images may show mosaic-like
noise patterns.
® The sound is muted during search.
Wi Repeat Playback
If you continue to press the Playback Button >] for 5 seconds or longer, the
Palmcorder switches to Repeat Playback Mode, and the [R [>] Indication
appears (©). (To cance! Repeat Playback Mode, set the [OFF/ON/MODE}]
Switch to [OFF}.)
For assistance, please call : 1-800-211-PANA(7262) or
' send e -mail to : consumerproducts @ panasonic.com