Table of Contents
Advertisement
2:51:32PM
=>
12:51:32PM
:
fa)
nines
LOW
|} licce-*
HIGH
tCOH
COLOR
LOW
| }ll----
HIGH
EVF
BRIGHTNESS
Low
(Il ll----
HIGH
Turning on/off the Palmcorder and selecting
Modes
Turn on the power first and then select Modes.
fi How to Turn on the Power
1
Set the [OFF/ON/MODE] Switch to [ON] while pressing the
center Button @.
The [CAMERA] Lamp lights up.
i How to Switch Modes
2
Slide the [OFF/ON/MODE] Switch.
With each slide of the Switch, the Mode switches in the order of Camera
Mode, VCR Mode, and Card Playback Mode.
The appropriate Mode Lamp lights up.
BB How to Turn off the Power
3
Set the [OFF/ON/MODE] Switch to [OFF] while pressing the
center Button.
Using the Viewfinder
Before using the Viewfinder, adjust the field of view so that the displays inside
the viewfinder become clear and easy to read.
1 Slide the Viewfinder backward and then tilt it upward.
* The Viewfinder angle is adjusted upward.
2
Adjust by sliding the Eyepiece Corrector Knob @.
Using the LCD Monitor
With the LCD Monitor open, you can also record the picture while watching it.
1
Turn the [OFF/ON/MODE] Switch to [ON].
2
Press the [PUSH OPEN] Button and, at the same time, bring
out the LCD Monitor about 90° in the direction of the arrow.
The Viewfinder goes off.
3
Adjust the LCD Monitor angle according to the desired
recording angle.
¢The LCD Monitor can rotate a maximum of 180 ° @ from the vertical
position to the upward direction and a maximum of 90° @ to the
downward direction. Forcefully rotating the LCD monitor beyond these
ranges will damage the Palmcorder.
Closing the LCD monitor
Push the LCD Monitor until the [PUSH OPEN] Button is securely locked.
i Adjusting Brightness and Color Level
When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to [YES],
the following items are displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD screen.
LCD Color Level [LCD COLOR]
Adjusts the color saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
Adjust the brightness of the image in the Viewfinder.
7 Press the [PUSH] Dial and select the item you want to adjust.
2
Rotate the [PUSH] Dial and increase or decrease the number
of the vertical bars on the Bar Indication.
¢ The Bar Indication has 8 steps. A larger number of vertical bars
indicates stronger brightness or color saturation.
Increasing the Brightness of the Entire LCD Monitor
Set the [LCD MODE} on the [DISPLAY SETUP] Sub-Menu to [BRIGHT].
¢ These adjustments do not affect the recorded images.
For assistance, please call : 1-800-211-PANA(7262) or
send é€ -mail to : consumerproducts
@ panasonic.com
Advertisement
Table of Contents
