Table of Contents
Advertisement
Recording
1
Set the [OFF/ON/MODE] Switch to [ON].
© The [CAMERA] Lamp lights up. @
2
Press the Recording Start/Stop Button.
Recording starts.
® After the [RECORD] is displayed, it changes to [REC]. @
The Tally Lamp (LED Lamp) @ lights up during recording and alerts
those being recorded that recording is in progress. The Tally Lamp
does not light up if the [TALLY LED] on the [OTHER FUNCTIONS] Sub-
menu is set to [OFF].
3
Press the Recording Start/Stop Button again to pause the
,
recording.
a
*(PAUSE] is displayed. @
#lf the Recording Pause Mode continues for more than § minutes, the power
is turned off automatically for tape protection and power conservation. To
resume recording from this condition, turn on the power again.
@ When recording while the Mode Selector Switch is set to [AUTO] @, the
Palmcorder automatically adjusts the focus and white balance. (In some
cases, they cannot be adjusted automatically and need to be adjusted
manually.) (<» 24, 25)
* For other notes, see page 51.
To Check the Recording
By pushing the [[GJ] Button 6] in the Recording Pause Mode, you can play
back the last few seconds of the recorded scene.
¢(CHK] is displayed. After checking, the Patmcorder resumes the Recording
Pause Made.
¢ For other notes, see page 51.
—To View the recorded scene while the Recording is
paused (Camera Search)
:
The recorded scene can be viewed by holding down the [--SEARCH] Button
@ or [SEARCH+] Button @ in the Recording Pause Mode.
The Camera Search function is useful for finding the starting point of a new
scene to create a smooth transition of one scene to another.
e When the (-SEARCH] Button is pressed, images are played back in the
reverse direction.
When the [SEARCH-+] Button is pressed, images are played back in the
forward direction.
* For other notes, see page 51.
Hi Self-Recording
By opening the LCD Monitor and turning it so that it faces forward (to the lens
side) ©, you can let the subject in front of the Patmcorder monitor the shot
while shooting is in progress.
When the LCD Monitor is opened, the Viewfinder is disabled automatically.
However, when the LCD Monitor is rotated forward, the image is also
shown in the Viewfinder.
if you prefer to have the image on the LCD Monitor to {ook like an image in
a mirror, set [SELF-REC] on the (OTHER FUNCTIONS] Sub-Menu to
[MIRROR]. {Mirror Mode)
Images are recorded normally and no left and right reversal occurs.
¢ if {MtRROR] is selected, only recording Indication [@], recording pause
Indication [@1 8], Card PhotoShot Indication [fy] and Remaining Battery
Power Indication [¥##4)] are displayed. If a general Waming/Alarm e*
Indication [[T]] appears, return the LCD Monitor to the original position in
order to check the specific content of the Waming/Alarm Indication.
Set the {[OFF/ON/MODE] Switch to [OFF].
For assistance, please call : 1-800-211-PANA(7262) or
send é -mail to : consumerproducts
@ panasonic.cam
Advertisement
Table of Contents
