Sony DHC-MDX10 Operating Instructions Manual page 73
Mini hi-fi component system
Hide thumbs
Also See for DHC-MDX10:
- Operating instructions manual (93 pages) ,
- Operating instructions manual (32 pages)
Table of Contents
Advertisement
Connecting
the MD
Walkman*
You can connect
Sony portable
minidisc
recorder/player
MD Walkman
with the MD
Walkman
cable.
For the operations
of the MD Walkman,
refer
to the instructions
of the MD Walkman.
Press
DISPLAY
on the MD
Walkman
repeatedly
until
the
elapsed
time
and
the track
number
appears
on the remote
(or in the
display
of the MD
walkman
with
MZ-R30).
The information
of the elapsed
time and
the track number
can be output
through
the remote
terminal
of the MD
Walkman.
Note
Do not connect the MD Walkman which is not listed
below to MD WM LINK terminal. This may cause
malfunction.
• MD Walkman
models compatible
with
this system.
Portable
minidisc
player:
MZ-E70,
E45 (Hong
Kong only), E55, ES0,
E44, E35, E33, E32, E30, E25, EP11
Portable
minidisc
recorder:
MZ-R30,
R35, R50, R55, R5ST (Europe
only)**
**Be sure to remove from the MD station, and
connect the MD Walkman only.
• When you connect
an MD Walkman
to this
system,
analogue
recording
to the MD
starts automatically
when
the MD
6
Set the volume
to maximum
with
the remote
of the MD Walkman.
7
Remove
the remote
of the MD
Walkman,
then connect
to the
DHC-MDX10.
Connect
the cable so that the cylinder
is
close to the MD Walkman.
Walkman
starts playing
(synchro
m
I/I
recording).
MD Walkman
cable
0
* MDWalkman
is a trademark
of Sony Corporation
.............................................................................................................................
.
Notes
..........................................................................................................................................
• Do not place the MD Walkman
on the DHC-
_1_
1
If the power
is on, press I / d) to turn
MDXI0.
The sound may be
interrupted
or noise
may occur. Besides, this may cause a malfunction
I
of the MD Walkman.
of .
_
..............
• The sound
may be distorted
during
playback
of
2
Release
the Digital
Mega Bass
the MD Walkman
when
the Digital
Mega Bass
function
is activated
or the AVLS function
is
O
(reinforcing
bass) function
of the
MD Walkman.
Set DIGITAL
MEGA BASS to 0 or press
DIGITAL
MEGA
BASS to turn off
"BASS" indicator.
3
Activate
the AVLS (reducing
the
volume)
function
of the MD
Walkman.
released.
• Be sure to turn off the power
before
connecting
because
noise or an incorrect
operation
may occur.
• The MD Walkman
requires
more power
than
normal
operation
when
connected
to DHC-
MDX10. Make sure that the power
is left enough
before
recording.
Ut
Set AVLS to "LIMIT".
4
Start playing
MD Walkman.
73
Advertisement
Table of Contents
