Prestored Audio Data - Sony DHC-MDX10 Operating Instructions Manual

Starting recording with 6 seconds of
prestored audio data (continued)
1
Insert a recordable MD.
2 Press FUNCTION repeatedly until
the source (e.g., TUNER) you want
to record appears in the display.
3 Press REC.
The deck stands by for recording.
4 Start playing the source you want to
record.
5 Press ENTER/YES at the point you
want to start recording.
Recording of the source starts with the
6 seconds of audio data stored in the
buffer memory.
If you use a recorded MD, the MD deck
automatically locates the end of the
recorded portion and starts recording
from there.
To stop Time Machine Recording
Press II.
Marking track
numbers
The track numbers can be marked as follows:
• Mark the track numbers automatically.
When you record from this system's CD
(digital recording) or during level-synchro
recording, the track numbers are
automatically marked.
• At any point while recording.
You can mark the track numbers while
recording any sources.
• After recording.
You can use Divide function (see page 50).
Marking track numbers
automatically while
recording
LeveI-Synchro Recording
The "LEVEL-SYNC" is factory set to on and
the track numbers are automatically marked.
If "L-SYNC" is not displayed during
recording, turn it on as follows. Track
numbers are automatically marked when the
input signal is under a certain level for more
than two seconds and then exceeds the
previous level.
(Powel
O
40 1,4 2,3