Sony DHC-MDX10 Operating Instructions Manual page 46

Erasing recordings Powor
m Erase Function
The MD deck lets you erase unwanted tracks
quickly and easily. You can restore the
contents to the condition before erasing
(unerase) by using the Undo function.
Note, however, check carefully the portion to
be erased, as you cannot undo an edit after
performing any additional edits.
The three options for erasing recordings are:
• Erasing a single track (Erase).
• Erasing all the tracks (All Erase).
• Erasing a portion of a track (A-B Erase).
To erase a single track
You can erase a track simply by selecting its
"MD" appears in the display.
Press MENU/NO while MD is
"Edit Menu" appears.
track number.
1 2 3,4
When you erase a track, the total number of
tracks on the MD decreases by one and all the ...................................................
tracks following the erased one are 1
Press FUNCTION repeatedly until
renumbered. 'IMoD"
Track 2
Press _M_a_ I
number
Turn the jog dial until the track you
want to erase appears, then press
ENTER/YES.
"Complete!!" appears for a few seconds
and the selected track is erased. The
track following the erased track begins
playing. (If you erase the last track, the
track preceding the erased track begins
playing.)
To cancel erasing
Press ll.
To undo the Erase Function
Use the Undo Function immediately after you
erased the track (see page 53).
46