Sony DHC-MDX10 Operating Instructions Manual page 45

6 Repeat steps 3 through 5 to
complete the entire title.
If you enter an incorrect character, press
or I_ until the character you want
to change flashes, then repeat steps 3
through 5.
To erase a character, press CLEAR while
the character is flashing.
7 Press ENTER/YES to complete the
labelling procedure.
The disc or the track is labelled. The
titles you labelled appear sequentially.
To cancel labelling
Press U.
Tip
You can label a track title while playing_ The current
track is played repeatedly until the labelling is
completed.
Note
]f the MD is record protected, "C11" and
"Protected" appears in the display alternately and
the MD cannot be recorded on. Press MD _ and
remove the MD, slide the record protection tab to
the closed position (see page 34), reinsert the MD
and try again.
To check the titles
To check the disc titles, press SCROLL on the
remote while play is stopped. To check the
track titles, press SCROLL while playing. The
titles scroll across the display. To stop
scrolling, press SCROLL. Press the button
again to resume scrolling.
To erase titles
1 While the deck is stopped, press MENU/
NO.
2 Turn the jog dial until "Name?" appears,
then press ENTER/YES.
3 Turn the jog dial until "Name Erase?"
appears, then press ENTER/YES. m
To erase all the titles, select "Name All eL
Ers?" -_.
4 Turn the jog dial until the disc or track you
want to erase the title appears, then press
ENTER / YES.
"Complete!!" appears.
45