Sony DHC-MDX10 Operating Instructions Manual page 17

1 Press A and insert a recorded tape
in deck A or B,
With the side
you want to
play facing
forward
Press DIRECTION repeatedly to
select _ to play one side. Select
_-)* to play both sides.
To play both decks in succession, select
RELAY (relay play).**
Press TAPE A (or TAPE B)
(DECK A (or DECK B) _ on the
remote).
Press TAPE A (or TAPE B) _ to play
the reverse side. (Press DECK A (or
DECK B) II_ again on the remote to play
the reverse side.) The tape starts playing.
* Ti_e deck stops automatically after
repeating the sequence five times.
** Relay play always follows the following
sequence:
Deck A (front side), Deck A (reverse side),
Deck B (front side), Deck B (reverse side).
To Do this
Stop play Press _.
Fast-forward Press _ or IMP.
Rewind Press _ or 1_1_.
Remove the cassette Press _.
Adjust the volume Turn VOLUME (or press
VOL +/- on the remote).
Tips
• Pressing TAPE A (or TAPE B) 11_ or "_ when the
power is off automatically turns the power on and
starts tape playback if there is a tape in the deck
(One Touch Play). When the system is in the
Power Saving Mode, the One Touch Play function
does not work.
• You can switch from another source to the tape
deck just by pressing TAPE A (or TAPE B) I1_ or
-_1 (Automatic Source Selection).
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears.
Searching for the beginning of a
track (AMS*)
During playback, turn the jog dial the same
direction as the -_1 or I1_ indicator to go
forward. Turn the opposite direction to go
back. (Or press _ or I_1_1 on the remote.)
The search direction, + (forward) or - (back),
and number of songs being skipped (1-9)
appear in the display.
Example: searching forward 2 songs
-/
* AMS (Automatic Music Sensor)
Notes
The AMS function may not operate correctly under
the following circumstances:
- When the unrecorded space between songs is less
than 4 seconds long.
- If completely different information is recorded on
the left and right channels.
- When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
- When the unit is placed near a television. (In this
case, we recommend moving the unit farther away
from the television or turning off the television.)