Control Panels - Vulcan-Hart ERO15 Service Manual

CONTROL PANELS

Solid State
Five product/programming keys: Left basket (up arrow); Right basket (down arrow); Temperature; Program
!
and Boil.
Four digit display window that indicates fryer status, time left to cook, and actual or set point temperature.
!
Decimal point of first character indicates heat on when lit.
Two LED lamps that illuminate when a basket timer is being programmed or blink to when a timer is
!
activated (left or right basket).
Boil key for automatic or manual mode BOIL out cleaning of fry tank.
!
Computer
Eighteen product/programming keys allow individual product cooking times for up to ten different products:
!
Product/Programming keys 1 thru 0; Oil Temp to view actual temperature or set the desired product cooking
temperature; L & R (Left & Right) basket selection; Toggle; Boil; and two Timer keys.
Left & Right Arrows - used to initiate programming of time and checking stored values (left 1-5 & right 6-0).
Left & Right displays that indicate actual or set point temperature, remaining times, operating mode, and
!
completion of preheat period.
Two LED lamps on the OIL TEMP key that indicate heat on and ten individual LED lamps above each of the
!
ten product/programming keys: LED's blink when a product key is activated, solid when using a key for
programming.
Boil key for automatic or manual mode BOIL out cleaning of fry tank.
!
ER SERIES ELECTRIC FRYERS - GENERAL
SOLID STATE CONTROL, D MODEL
COMPUTER CONTROL, C MODEL
Page 7 of 48 F35613 ( September 2003)