JVC HR-S10EG Service Manual page 34

Video cassette recorder
Table of Contents

Advertisement

IN CASE OF DIFFICULTY
What may initially appear to be trouble is not always a real problem. Make sure first... .
Symptoms
Check points
No power is apptied to the recorder
with a power supply unit attached.
Is a power supply unit (battery pack, AC power pack or car battery adapter)
correctly attached?
Remove it once and reattach after a few seconds.
© Is the battery pack charged?
Forward mode.
No power is applied to the recorder/
@
Is the power cord disconnected?
tuner combination.
— Connect it.
If it fails, reconnect it after a few seconds.
@
Is the rear panel MAIN POWER/NETZ switch of the tuner set to ON/EIN?
© Is the tuner's TIMER/SCHALTUR button pressed to ON/EIN?
— Press it to OFF/AUS,
© Is the recorder correctly connected to the tuner?
© Is the recorder's POWER/BETRIEB button in the ON position?
@ Is the tuner's CHARGE/LADEN indicator lit?
— Press the tuner's CHARGE/LADEN button to turn the indicator off.
Playback picture does not appear
@
Is the TV receiver's channel selector set to the correct video channel?
while the tape is running.
Set to the RF converter channel. (See page 10.)
AUFN., VERTON. or INSERT
©
ls the safety tab on the video cassette broken?
button cannot be engaged.
~— Reseal the slot with cellophane tape.
Tape stops in the Rewind or Fast
©
Is the MEMORY
button set to ON?
~ Press the MEMORY
button to cancel the '"M" mark in the display.
Noisy playback picture.
Adjust with the TRACKING/SPURLAGE control.
Return the control to its centre position after playing back the particular tape.
Noise such as whistling or howling is
heard from TV while camera
recording or audio dubbing.
Move camera or microphone away from TV or reduce TV sound volume.
i
Playback sound is different from
that recorded.
is a microphone plugged in?
Unplug it.
Timer recording impossible.
Is the clock time correct or the timer correctly set?
~ Check.
Have you pressed the tuner's TIMER/SCHALTUR button to ON/EIN?
ey fast forward impossible.
@ Is the PLAYMWIEDERG. indicator lit?
— The loaded cassette may be without it safety tab.
Press the TIMER/SCHALTUR
button OFF/AUS and, after powering the
recorder, replace the cassette with a recodable oni
Camera recording impossible.
5.8. Is the camera correctly connected to the recorder
Playback, reverse playback, rewind
@
Is the tape already wound to one end or the other?
— Check the tape inside the cassette.
—25-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-s10ekTu-s10egTu-s10ek

Table of Contents