JVC HR-S10EG Service Manual page 120

TIMER indicator
@ When the TIMER/SCHALTUHR button is pressed to
ON/EIN with a cassette loaded and the timer correctly
programmed, the TIMER indicator on the display will
light with the corresponding preset programme num-
ber(s) also lighting and the power is turned off.
@ When you have preset several programmes at a time,
confirm that all the preset programme numbers light
together with the TIMER indicator when the TIMER/
SCHALTUHR button is pressed. The programme
whose number does not light has not been correctly
preset (for instance, the channel has not been entered,
the preset switch-on and switch-off times are the same,
or no switch-off time has been entered). Recheck the
programmed data.
e@ If all programmes have been wrongly preset, the
TIMER indicator will flash for about 10 seconds when
the TIMER/SCHALTUHR button is pressed, and then
remains lit with no programme number lighting.
© If a cassette is not loaded or if its safety tab has been
removed, the PLAYMWIEDERG. indicator on the
recorder will blink when the TIMER/SCHALTUHR
button is pressed.
Timer operation
@ Tape loading starts 10 seconds before the preset
switch-on time,
During timer recording, the number of the programme
that is presently operating will be flashing.
@ After timer recording or when the end of the tape is
reached during timer recording, the power is switched
off.
© If a power failure should occur (and last longer than
about 60 minutes), not only time-keeping stops (see
page 10), but also all the preset data will be cancelled.
A flashing 0:00 indicates this after power has been
reapplied. In such cases, first correct the time indica-
tion and then re-enter the programming data.
Notes:
@ After timer recording, press the TIMER/SCHAL-
TUHR button to OFF/AUS.
@ When power is applied after timer recording, the
recorder enters the Recording Pause mode. To
operate the recorder as usual, first press the STOP
button.
_128-
FOR A BETTER UNDERSTANDING OF THE
PROGRAMMABLE TIMER (TU-S10EG)
Two-week timer
"Two-week" presetting capacity means that you can
"reserve" recordings on any one of 14 days in advance
including the day of setting.
If the current day of setting is Sunday:
If the current day of setting is Wednesday for example:
1st week
SA
(Swern
TU -~S10EG.
8-programme timer
"8-programme" presetting capacity means that you
can have 8 separate programme entries which contain
different programming data. Because of this capacity,
you can even "reserve" 8 different TV programmes,
either on the same day or on different days.
Each programme (No. 1 through No. 8) entry contains
information on 'TV programme channel number",
"day", "start time'', 'stop time" and "either single or
repeat".
Example of the contents of one programme entry:
Pro- | TV program-
gramme | mechannel | Day
number number
Start | Stop
time | time
2 12 12:30 | 13:00
"1.MI
(1st Wed.)
2nd week ——
2nd week
og Ro ee
SA
4
so Mi
In this situation, there may be no possibility of
confusion in setting the day.
Namely, the "1. MO" is Monday of the current
week and the "2. MO" is Monday of the next
week. The same applies to other week days.
Regarding Sunday, there are two different cases;
one is that you are going to set the timer to a time
before the current time of setting and the other is
that the preset time is a time after the current time
of setting.
In the former case, the "1.SO" is the next Sunday
and the "2, SO" is the Sunday after next.
In the latter case, the "1. SO" is the current
Sunday and the "2. SO" is Sunday of the next
week,
@ Remember that the "1, MO", "1, DI" and so
on... mean the first coming Monday, the first
coming Tuesday, and so on, and not Monday of
the current week.
Similarly, the "2. MO", "2. DI andso on... are
the second coming Monday, the second coming
Tuesday, and so on, and not Monday or Tuesday
of the next week,
if you are on Wednesday for example, and wish to
record something on Tuesday of the next week,
the preset data should be "1, Di". To record on
Thursday of the next week, set "2, DO".
Regarding Wednesday, the same as mentioned
about Sunday on the left applies.
Variety of setting possibilities
@ You can set for some day of the Ist week or the
2nd week.
You can set for one day of every week by first
setting that day of the 1st week and pressing the
WIEDERHOL. button.
You can set for one day of every week starting
from the second week by first setting that day of
the 2nd week and pressing the WIEDERHOL.
button.
You can set for all days, For this setting, obtain
the indication "SO MO D! Mf! DO FR SA", and
recordings will be repeated at the same time
everyday for one week.
You can set for all days week after week. For this
setting, first obtain the indication as mentioned
above and then press the WIEDERHOL. button.
And recordings will be made everyday week after
week,
@ All the above applies for all 8 programme entries.
Programme priority
@ |f you have preset two programmes for the same
day and the same switch-on time, the setting corre-
sponding to the smaller programme number has
priority.
lf two programmes have preset' times which
overlap, the earlier-started programme will be
interrupted by the later one.
= (8: